{"id":1695,"date":"2023-01-20T13:34:18","date_gmt":"2023-01-20T04:34:18","guid":{"rendered":"https:\/\/am.denso.com\/plug-global\/?page_id=1695"},"modified":"2023-02-22T15:29:32","modified_gmt":"2023-02-22T06:29:32","slug":"diagnosis","status":"publish","type":"page","link":"https:\/\/am.denso.com\/plug-global\/basic\/diagnosis\/","title":{"rendered":"Troubleshooting"},"content":{"rendered":"\n

Diagnosing the state of the spark plugs is an effective method for elucidating the cause of engine troubles.<\/p>\n\n\n\n

Normal<\/h5>\n\n\n\n
\n
\"\"<\/figure>\n\n\n\n

The insulator leg section has light gray or tan deposits and slight electrode erosion.<\/p>\n<\/div>\n\n\n\n

Trouble<\/h5>\n\n\n\n

The flowing trouble can be caused by engine defects.<\/p>\n\n\n\n

Engine trouble<\/h3>\n\n\n\n
Case 1<\/strong><\/strong><\/th>Starting defect
Misfiring when idling
Misfiring during normal running<\/td>		Diagnosis 1<\/a><\/td><\/tr>
Case 2<\/strong><\/th>Misfiring only when running at high speed or when accelerating suddenly<\/td>Diagnosis 2<\/a><\/td><\/tr>
Case 3<\/strong><\/strong><\/th>Loss of power when running at high speed or under high load Piston breakdown<\/td>Diagnosis 3<\/a><\/td><\/tr>
Case 4<\/strong><\/strong><\/th>Trouble other than with the engine<\/td>Diagnosis 4<\/a><\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

Spark plug state<\/h3>\n\n\n\n

Diagnosis 1<\/h4>\n\n\n\n

\uff1cCase 1\uff1e<\/h5>\n\n\n\n
    \n
  • Starting defect<\/li>\n\n\n\n
  • Misfiring when idling<\/li>\n\n\n\n
  • Misfiring during normal running<\/li>\n<\/ul>\n\n\n\n
    Carbon fouling<\/strong><\/strong><\/h6>\n\n\n\n
    Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
    The insulator foot section and electrode section are covered with dried, soft black carbon.<\/td><\/tr>
    Results<\/strong><\/strong><\/th>Poor starting, misfiring, acceleration defect.<\/td><\/tr>
    Cause<\/strong><\/strong><\/th>Repeated short-distance driving (driving with the engine cool), incorrect choking (overly rich air-fuel mixture), injection timing delay, plug heat range too high.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    Oil fouling<\/strong><\/strong><\/h6>\n\n\n\n
    Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
    The insulator section and electrode section is black and lustrous with wet oily deposits.<\/td><\/tr>
    Results<\/strong><\/strong><\/th>Poor starting and misfiring.<\/td><\/tr>
    Cause<\/strong><\/strong><\/th>Oil leaking due to piston ring, cylinder, or valve guide wear (occurs easily to new engines and engines that have just been overhauled), high oil content in air-fuel mixture.(2-stroke engines)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    Fuel fouling<\/strong><\/strong><\/strong><\/h6>\n\n\n\n
    Appearance<\/strong><\/strong><\/strong><\/th>The spark plug is wet with gasoline immediately after it is removed, but it soon dries off.<\/td><\/tr>
    Results<\/strong><\/strong><\/th>Poor starting and misfiring.<\/td><\/tr>
    Cause<\/strong><\/strong><\/th>The air-fuel ratio is too rich and is not igniting. (Among the ways this can happen is if the driver presses the accelerator over and over while starting the vehicle.)<\/td><\/tr>
    Handling<\/strong><\/strong><\/th>Remove all the spark plugs, crank the starter motor to bring fresh air into the cylinder and make the air-fuel ratio leaner.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    Extreme electrode wear<\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
    Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
    The center and ground electrodes are rounded and the gap has become too wide.<\/td><\/tr>
    Results<\/strong><\/strong><\/th>Poor starting and acceleration.<\/td><\/tr>
    Cause<\/strong><\/strong><\/th>Inadequate maintenance. (spark plug has exceeded its service life.)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    Spark plug gap too large<\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
    Appearance<\/strong><\/strong><\/th>The gap is wider than appropriate.<\/td><\/tr>
    Results<\/strong><\/strong><\/th>Poor starting and acceleration.<\/td><\/tr>
    Cause<\/strong><\/strong><\/th>The gap is inappropriate; the wrong spark plug was selected.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
    Insulator breakage<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
    Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
    Insulator cracked<\/td><\/tr>
    Results<\/strong><\/strong><\/th>Shorts due to insulation defect, causes poor idling and misfiring during acceleration.<\/td><\/tr>
    Cause<\/strong><\/strong><\/th>Spark plug removed\/installed incorrectly. (spark plug turned too far with spark plug wrench, excess tightening torque, or other inappropriate work.)<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

    Diagnosis 2<\/h4>\n\n\n\n

    \uff1cCase 2\uff1e<\/h5>\n\n\n\n
      \n
    • Misfiring only when running at high speed or when accelerating suddenly<\/li>\n<\/ul>\n\n\n\n
      Lead fouling<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
      Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
      The insulator leg section has yellow or yellowish-brown burnt on deposits or is covered with a glossy surface.<\/td><\/tr>
      Results<\/strong><\/strong><\/th>Misfiring during rapid acceleration or under high load, but no problem in normal running.<\/td><\/tr>
      Cause<\/strong><\/strong><\/th>Use of gasoline with much lead.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

      Diagnosis 3<\/h4>\n\n\n\n

      \uff1cCase 3\uff1e<\/h5>\n\n\n\n
        \n
      • Loss of power when running at high speed or under high load<\/li>\n\n\n\n
      • Piston breakdown<\/li>\n<\/ul>\n\n\n\n
        Overheating<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
        Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
        The insulator leg section is scorched extremely white with small black deposits. Rapid electrode wear.<\/td><\/tr>
        Results<\/strong><\/strong><\/th>Loss of power when running at high speed or under high load.<\/td><\/tr>
        Cause<\/strong><\/strong><\/th>Spark plug incorrectly tightened, engine cooling problem, ignition timing too early, spark plug heat range too low, severely abnormal combustion.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
        Pre-ignition<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
        Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
        The center electrode or ground electrode is melted or scorched. There are spots on the insulator leg section and deposits of aluminum or other metal powder.<\/td><\/tr>
        Results<\/strong><\/strong><\/th>Power loss due to engine damage.<\/td><\/tr>
        Cause<\/strong><\/strong><\/th>Often this is due to overheating; pre-ignition is a phenomenon in which combustion occurs before ignition.
        The plug heat range is too low, the injection timing is too advanced, etc.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
        Insulator breakage<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
        Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
        The insulator leg section is cracked or broken.<\/td><\/tr>
        Results<\/strong><\/strong><\/th>Misfiring<\/td><\/tr>
        Cause<\/strong><\/strong><\/th>Severely abnormal combustion, lack of attention to gap adjustment.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
        Housing installation screw section melting<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
        Appearance<\/strong><\/th>\"\"<\/td><\/tr>
        Housing installation screw section melting.<\/td><\/tr>
        Results<\/strong><\/strong><\/th>Power loss due to engine damage.<\/td><\/tr>
        Cause<\/strong><\/strong><\/th>Incorrect spark plug tightening.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
        Physical damage to ignition tip section<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
        Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
        The electrode is bent and the insulator leg section is broken. Indentations are sometimes seen on the electrode.<\/td><\/tr>
        Results<\/strong><\/strong><\/th>Misfiring.<\/td><\/tr>
        Cause<\/strong><\/strong><\/th>The spark plug thread reach is too long for the engine head or there is some kind of foreign matter (a small bolt, nut, or the like) in the combustion chamber.<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n
        Ground electrode damage & breakage<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
        Appearance<\/strong><\/th>\"\"<\/td><\/tr>
        Ground electrode is broken in the middle or at the base; much of the cross section shows fatigue fracturing.<\/td><\/tr>
        Results<\/strong><\/strong><\/th>Ignition failure, damage to the engine or auxiliaries from the grounding terminal fragment.<\/td><\/tr>
        Causes<\/strong><\/strong><\/th>Increased stress on the ground electrode due to high-output, high-torque engine or tuning, modification, etc.; excessive vibration due to poor maintenance, severe operating environment, etc.; insufficient fastening \u21d2 excessive vibration due to loose plug<\/td><\/tr>
        Countermeasures<\/strong><\/strong><\/th>(1) Spark plug selection
        \u30fb As a countermeasure to increased stress on the ground electrode, changing to a spark plug with a small ground electrode is an effective way to handle the problem from the plug side.
        Examples: 2-ground electrode plug, small ground electrode plug (taper cut), racing plug, surface discharge plug, etc.
        However, fundamentally, it is necessary to select a spark plug that matches the vehicle\u2019s level of tuning.
        (2) Engine and vehicle body maintenance
        \u30fbReduction of excessive vibration through engine and vehicle body maintenance
        \u30fbTightening plugs with the recommended torque<\/td><\/tr><\/tbody><\/table><\/figure>\n\n\n\n

        Diagnosis 4<\/h4>\n\n\n\n

        \uff1cCase 4\uff1e<\/h5>\n\n\n\n
          \n
        • Trouble other than with the engine<\/li>\n<\/ul>\n\n\n\n
          Corona soiling<\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/strong><\/h6>\n\n\n\n
          Appearance<\/strong><\/strong><\/th>\"\"<\/td><\/tr>
          Brown deposits on the insulator directly above the housing<\/td><\/tr>
          Results<\/strong><\/strong><\/th>No impact on the spark plug performance<\/td><\/tr>
          Cause<\/strong><\/strong><\/th>This occurs due to electrical stress in the air near the insulator. (This is not a spark plug gas leak, for which it is sometimes mistaken.)<\/td><\/tr><\/tbody><\/table><\/figure>\n","protected":false},"excerpt":{"rendered":"

          Diagnosing the state of the spark plugs is an effective method for elucidating the cause of engine troubles. N […]<\/p>\n","protected":false},"author":10,"featured_media":0,"parent":464,"menu_order":10,"comment_status":"closed","ping_status":"closed","template":"","meta":{"_editorskit_title_hidden":false,"_editorskit_reading_time":3,"_editorskit_is_block_options_detached":false,"_editorskit_block_options_position":"{}","footnotes":""},"class_list":["post-1695","page","type-page","status-publish","hentry"],"_links":{"self":[{"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/pages\/1695","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/pages"}],"about":[{"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/types\/page"}],"author":[{"embeddable":true,"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/users\/10"}],"replies":[{"embeddable":true,"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/comments?post=1695"}],"version-history":[{"count":113,"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/pages\/1695\/revisions"}],"predecessor-version":[{"id":4649,"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/pages\/1695\/revisions\/4649"}],"up":[{"embeddable":true,"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/pages\/464"}],"wp:attachment":[{"href":"https:\/\/am.denso.com\/plug-global\/wp-json\/wp\/v2\/media?parent=1695"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}